Understanding EN 13200-6:2020: A European Standard for Demountable Grandstands
In the sports facilities industry, the structural safety, load-bearing performance, and reliability of grandstands are essential factors in ensuring the safety of spectators and the long-term operation of sports venues.
EN 13200 is a European standard series covering spectator facilities in sports venues. Within this series, EN 13200-6:2020 specifically addresses demountable (temporary) stands, providing technical requirements and testing references for this type of spectator facility.
The standard includes provisions concerning structural performance and imposed loads. In particular, Clause 5.4.3 addresses distributed vertical loading, while Clause 5.4.4 addresses concentrated or isolated loading.
These testing requirements help evaluate how grandstand platforms and related components respond to different loading conditions, including deformation under load and residual deformation after the load is removed.
For manufacturers, referring to this standard helps establish a more systematic approach to structural design, product testing, and quality management. It also provides international buyers, engineering contractors, and sports facility operators with a more recognizable technical reference when evaluating grandstand products.
SMART GROUP Successfully Completes TÜV SÜD Third-Party Testing
As a professional one-stop supplier of comprehensive sports facility solutions from China, SMART GROUP places product quality, structural reliability, and customer safety at the center of its manufacturing philosophy.
To further verify the structural performance of its grandstand products, SMART GROUP submitted its Grandstand-F2 sample to TÜV SÜD Certification and Testing (China) Co., Ltd., Guangzhou Branch, for independent testing.
According to TÜV SÜD Test Report No. 64.190.24.3095.01-00, dated October 18, 2024, the submitted grandstand sample underwent distributed loading and concentrated loading tests, with reference to the relevant requirements of EN 13200-6:2020.
The tested product featured an aluminum alloy 6061-T6 platform, with a platform area of approximately 2.9 m².
The testing included:
Distributed loading test: A 1,250 kg load was applied to the entire 2.92 m² platform, resulting in 5 mm deflection under loading and 0 mm residual deflection.
Localized distributed loading test: A 625 kg load was applied to a 1 m² platform area, resulting in 2 mm deflection under loading and 0 mm residual deflection.
Concentrated loading test: A 150 kg load was applied to the platform, resulting in 1 mm deflection under loading and 0 mm residual deflection.
Seat loading test: A 100 kg load was applied to the tested seat, resulting in 55 mm deflection under loading and 5 mm residual deflection.
These measurements provide technical evidence of the tested sample's structural response under the specified loading conditions.
The independent testing by TÜV SÜD demonstrates SMART GROUP's commitment to evaluating product performance through professional third-party testing rather than relying solely on internal quality inspections.
TUV test report
Making International Standards an Important Reference for Quality Control
For SMART GROUP, product quality is not simply a marketing statement. It is an essential principle that guides product development, engineering design, manufacturing, and inspection.
The company regards relevant international technical standards, including EN 13200-6:2020 where applicable, as important references in its grandstand quality control system.
From material selection and structural design to manufacturing processes and product inspection, SMART GROUP continuously works to improve its quality management procedures and technical capabilities.
By incorporating standardized testing requirements into product evaluation, the company aims to strengthen its understanding of load-bearing performance, structural deformation, and overall product reliability.
At the same time, third-party testing provides valuable technical feedback that can support continuous product improvement and help the company better meet the expectations of international customers.
It is important to emphasize that the TÜV SÜD report relates specifically to the submitted Grandstand-F2 sample. It does not automatically constitute certification of every product or establish that all mass-produced products have identical test results. Nevertheless, it represents an important step in SMART GROUP's ongoing commitment to quality assurance.
SMART GROUP: Building Reliable Sports Facilities for the Global Market
As international demand for professional sports infrastructure continues to grow, buyers are paying increasing attention to product safety, structural quality, manufacturing capabilities, and technical documentation.
SMART GROUP provides a wide range of sports facility products, including steel structure grandstands, aluminum grandstands, stadium seating, substitute player benches, and electric retractable seating systems.
With integrated capabilities covering design, production, sales, and installation, SMART GROUP is committed to providing one-stop sports facility solutions for stadium contractors, engineering companies, schools, sports clubs, distributors, and government projects worldwide.
The TÜV SÜD testing based on EN 13200-6:2020 reflects the company's determination to benchmark its product evaluation against internationally recognized technical requirements.
At SMART GROUP, quality is built into every stage of the process. By continuously referencing international standards and strengthening product testing, we aim to deliver safer, more reliable, and more durable sports facility solutions to customers around the world.
Author：SMART GROUP - Global Sports Facility Manufacturer & Integrated Project Solution Provider
